ThermaSIP | Benefits

Structural Integrity:

A SIP building is significantly superior to a conventionally framed building in terms of shear
resistance, flexural strength, compressive resistance and uplift resistance. Evidence of the superior
performance of SIPs can be found in the real world, where SIP houses have survived earthquakes and
hurricanes when the stick-built houses around them were destroyed.

Earthquake Resistance:

Earthquakes will not bother the ThermaSAVE® Building System unless the ground sinks which
affect the building and its foundations. Seismic Tests have been conducted on the ThermaSAVE
Building System by the FAS (Federation of American Scientists) engineers and have withstood and
surpassed the strongest earthquake and ground acceleration recorded in history. It has successfully
met the acceptance criteria of structural integrity stated in the test plan during the 5 seismic
simulation tests it has undergone.

Moisture Protection:

ThermaSAVE® SIPs have a very low moisture permeability which makes it an excellent choice for a
building structural and thermal envelope as well as roofing material. These panels are also an
excellent choice for basement and foundation walls when designed and engineered in accordance
with its physical properties. It's insulation characteristic creates warmer areas during cold weather
conditions and cooler areas in the summer in below ground applications.

Fire Resistance and Retardation:

Meet and exceeds fire tests required for the type of buildings and structural components for which
they're normally used. The fiber cement surface is non-combustible, will not burn, and has a zero
flame-spread index, a zero smoke development number and a fire rating of zero (accdg. to NFPA).
The EPS is fire retardant with a flash point between 600º and 650º F, as opposed to Douglas which
has a flash point of 500º f.

Wind Resistance:

Standard installed panels can withstand winds of over 110mph, and are easily upgraded to withstand
200-mph winds.

Termite and Rodent Resistance:

Fiber cement boards won't burn, rot or cup and is impervious to salt spray, termites, woodpeckers,
carpenter bees, and other pests. Fiber cement siding is appropriate for hot and humid climates
because it is resistant to rot, fungus, and termite infestation. Fiber Cement holds paint for several
years longer than wood. Have zero nutritive value for plants, insects or vermin. Borax is added to
create another barrier against insects.

High Energy Savings:

High R-factor and helps retain heating and cooling in a building resulting in a substantial reduction in
utility costs. The expanded polystyrene does not lose its insulation value over the years, nor does it
release toxic chemicals. Exceeds insulation codes and retain R-value over time. In an average 140
Sq.m. home, one would normally use a 3 -4 ton A/C unit. With a ThermaSAVE panel home, that
same area would only use a 1.5 - 2 ton A/C unit, a savings of 50% on air-conditioning expense.

Sound Insulation:

ThermaSAVE® panels are sound retardant. Low Noise Transmission. They are resistant to sound
transmission and are excellent for use in apartment buildings, hotels and offices. They can also be
used for interior party walls and floors in multiple dwelling units.

Electrical System:

Electrical chases are precut into the foam core of the panel prior to assembly. The ThermaSAVE®
panel EPS core, because of its high insulation values, act as electrical chases for electrical wirings
within the building envelope, thus eliminating the need for added piping protection, thus providing
additional savings in construction costs.

Construction Ease:

Designed to help you build better buildings in less time, ThermaSAVE® panels are quick and easy to
assemble, saving significantly in labor cost. Skilled help is unnecessary, making the panels an
excellent choice for the do-it-yourself builder. ThermaSAVE® panels can be pre-engineered thus
eliminating many of the steps that are normally required on the job site in a conventional building
construction. Built-in insulation, exterior and interior are ready to receive almost any type of finish,
fsuch as plain latex paint, stucco finish, metal or aluminum siding, colored granules, pea-gravel,
decorative tiles or various types of aggregate texturing; Exterior requires no moisture sealant, panels
can be customized in the factory to meet your individual needs.